|
|
Hypertherm Powermax 1250 Plasma Cutter 75' Machine Torch #087048
|
Item Number: 87048
|
Capacity
Mild Steel |
Dross free
Maximum pierce capacity |
na
16 mm (5/8") |
| Stainless Steel |
Maximum pierce capacity
|
16 mm (5/8")
|
| Aluminum |
Maximum pierce capacity |
16 mm (5/8")
|
Speed*
(Mild steel) |
At maximum pierce capacity |
16 mm (5/8")
660 mm/m
(26 ipm) |
| Cut angle |
ISO 9013 range** |
5 |
| Weldability |
|
Preparation
required |
Process gases
by material
(Plasma/shield) |
Mild steel
Stainless steel
Aluminum |
Air
Air, N2
Air, N2 |
| Process amps |
This is for the torch only.
Not all processes available
for all materials |
25-80 |
* Note: Take care in comparison: competitors often show maximum cutting speeds rather than speeds that deliver the best cuts, as shown above. Cut speeds listed above deliver best cut quality, but cut speeds can be up to 50% faster.
** ISO 9013 is a standard that defines cut quality of thermally cut parts. The lower the range (range 1 is the lowest), the smaller the angle on the cut face. Cut angle in range 4 is better than in range 5.
|
Regular Price: $8.70
Your Price: $6.53
You Save: $2.17 (25 %)
Deflector
|
Regular Price: $13.60
Your Price: $10.20
You Save: $3.40 (25 %)
Shield
|
Regular Price: $16.30
Your Price: $12.23
You Save: $4.07 (25 %)
Swirl Ring
|
Regular Price: $16.30
Your Price: $12.23
You Save: $4.07 (25 %)
Shield Gouging
|
Regular Price: $16.30
Your Price: $12.23
You Save: $4.07 (25 %)
Swirl Ring - Fine Cut Parts
|
Regular Price: $30.70
Your Price: $23.03
You Save: $7.67 (25 %)
Retaining Cap
|
Regular Price: $31.50
Your Price: $23.65
You Save: $7.85 (25 %)
Nozzle 80A Shielded
|
Regular Price: $31.50
Your Price: $23.65
You Save: $7.85 (25 %)
Nozzle 60 Amp
|
Regular Price: $31.50
Your Price: $23.65
You Save: $7.85 (25 %)
Nozzle 40 Amp
|
Regular Price: $31.50
Your Price: $23.65
You Save: $7.85 (25 %)
Nozzle 80 Amp
|
Regular Price: $31.50
Your Price: $23.65
You Save: $7.85 (25 %)
Nozzle Ext 40 Amp
|
Regular Price: $31.50
Your Price: $23.65
You Save: $7.85 (25 %)
Nozzle Ext 60 Amp
|
Regular Price: $32.50
Your Price: $24.40
You Save: $8.10 (25 %)
Nozzle
|
Regular Price: $43.00
Your Price: $32.25
You Save: $10.75 (25 %)
Electrode
|
Regular Price: $45.00
Your Price: $33.75
You Save: $11.25 (25 %)
Nozzle Gouging
|
Regular Price: $45.00
Your Price: $42.50
You Save: $2.50 (6 %)
System dust covers
|
Regular Price: $55.00
Your Price: $51.50
You Save: $3.50 (6 %)
Hand gouging heat shield
|
|
Regular Price: $118.00
Your Price: $88.50
You Save: $29.50 (25 %)
Fine Cut Kit
|
Regular Price: $100.00
Your Price: $93.75
You Save: $6.25 (6 %)
Wheel Kit
| |
|
|