|
|
Lincoln Ranger 305G Kohler with Electric Fuel Pump #K1726-5
|
Regular Price: $5,130.00
Your Price: $3,950.00
You Save: $1,180.00 (23 %)
Item Number: K1726-5
|
The Ranger 305 G is a powerful stick, TIG, wire and pipe welding engine driven welder that is ready for all day, everyday performance. Rugged and dependable, the Ranger 305 G is built with a totally enclosed case for maximum protection; Lincoln's Chopper Technology for an arc operators appreciate; and a 12 gallon fuel tank that will last you through the entire day. Lincoln's Ranger 305 G ... it's ready for a workout.
| Processes
|
|
Stick, TIG, MIG, Flux-Cored, Gouging
|
Gasoline Engine-Driven Welder
- A powerful 300 amp DC CC/CV gasoline engine-driven welder. All rated outputs at 100% duty cycle 104ðF (40ðC).
- Only compact gasoline welder in North America rated at 29V for 300 amps of stick welding.
New! 23 HP Kohler Gasoline Engine
- Increase from 22 HP to 23 HP for plenty of engine horspower.
- 2-cylinder, 4-cycle OHV (overhead valve) air-cooled.
Multi-Process Welding
- Excellent DC multi-process welding for general purpose stick, downhill pipe (stick), TIG, cored-wire, MIG (CO2 and blended gas) and arc gouging.
Digital Weld Meters
- Digital weld meters for amps and volts make it easy to precisely pre-set your procedures and monitor actual welding output.
Superior Arc Performance
- Lincolns Chopper Technologyprovides easy starts, a smooth arc, low spatter and excellent bead appearance.
10,500 Watts Peak Single-Phase AC Generator Power
- 10,500 watts peak for motor starting. 500 watts more!
- 9,500 watts continuous for high capacity needs such as a back-up generator, powering a Pro-Cut® plasma cutteror an Invertec® inverter welder. Also for lights, a grinder or other power tools.
Skewed Rotor Design
- Skewed rotor design provides AC power suitable for operating Lincoln Pro-Cut® plasma cutters and inverter power sources. Lincoln was first in the welding industry with this feature.
Choice of Mechanical or Electric Fuel Pump
- Mechanicalfor most environments.
- Electric for high altitude operation.
Three-Year Warranty
- Three-year Lincoln warranty on welder (engine is warranted separately by the engine manufacturer).
Weight: 510 lbs. (231 kgs. )
Dimensions (in) H x W x D : 36.2 x 21.5 x 42.3
Dimensions (mm) H x W x D : 920 x 546 x 1073 |
|
|
Regular Price: $217.00
Your Price: $196.00
You Save: $21.00 (10 %)
Portable current control provides the same dial range as the current control on the welder. Consists of a 6-pin Amphenol connector which plugs into the remote control Amphenol. 25 foot cable length.
|
Regular Price: $272.00
Your Price: $245.00
You Save: $27.00 (10 %)
Provides 25 ft (7.6m) of remote current control for TIG welding. (6-pin plug connection).
|
Regular Price: $293.00
Your Price: $250.00
You Save: $43.00 (15 %)
Portable current control provides the same dial range as the current control on the welder. Consists of a 6-pin Amphenol connector which plugs into the remote control Amphenol. 100 foot cable length.
|
Regular Price: $336.00
Your Price: $279.00
You Save: $57.00 (17 %)
Depress pedal to increase current. Depressing pedal fully achieves maximum set current. Fully raising the pedal finishes the weld and starts the Afterflow cycle.
|
Regular Price: $2,698.00
Your Price: $2,195.00
You Save: $503.00 (19 %)
The Precision TIG 225 gives you the "Power to Perform", for general fabrication, automotive/motorsports, vocational schools or serious hobby work.
|
Regular Price: $4,811.00
Your Price: $3,750.00
You Save: $1,061.00 (22 %)
The Invertec V205-T AC/DC is a compact, TIG power source intended for critical AC or DC TIG welding.
| | |
|
|