Miller Millermatic 212 with Autoset MIG Welder 907405
$408.00 (17 %)
Manufacturer Part No:
New! Auto-Set is a breakthrough control that automatically sets your welder to the proper parameters. Auto-Set makes set up very simple and gives you precise settings instantly.
Manual Mode allows you to manually set weld parameters for broader applications.
NEW! Infinite voltage control replaces "tap" settings which means you can now "dial in" precise weld voltage and wirefeed speed when using the Manual Mode.
Compatible with Spoolmatic 15A/30A spool gun! The Spoolmatic 15A/30A with wire feed speed control on the gun saves time for the operator by eliminating the need for the operator by eliminating the need to go back to the machine to change the spool gun wirefeed speed.
NEW! Line Voltage Compensation keeps welding output constant even if power input varies by +/- 10%.
NEW! No more replacing mechanical output contactors. Our built-in solid-state contactor circuit makes wire electrically "cold" until the trigger is pulled, and gives you life-long welding output and performance.
NEW! Reduce Maintenance and Operating Costs with our Fan-On-Demand cooling system that only operates when needed, reducing power consumption and contaminants drawn into the machine.
EZ-Access Consumable Compartment and Parameter Chart - convenient new flip-down compartment that provides fast access to parameter chart and consumables.
Larger work area - now with longer 15-ft M-25 gun.
Patent-pending EZ-Change Low Cylinder Rack allows operators to easily roll cylinders on and off of rack - no need to lift cylinders.
Compatible with Bobcat welder/generators.
Flux Cored (FCAW)
Garages/ Body Shops
Farm and Ranch
208/230 V, 1-Phase, 60 Hz
160 Amps at 24.5 VDC, 60% duty cycle Welding Amperage Range
30 - 210 AmpsWire Speed
50 - 700 IPM (1.3 - 17.8 m/min) Net Weight
178 lb (81 kg)
Comes Complete With
7 ft (2.1 m) power cord and plug (208/230 V model only)
15 ft (4.6m), 250 amp M-25 MIG gun for .030/.035 in wire
10 ft (3 m) work cable and clamp
Argon mix regulator/flow gauge w/hose
Extra contact tips
Factory-installed running gear with EZ-Change Low Cylinder Rack
.030/.035 in reversible drive rolls
Set-up and operation interactive CD
New! Material thickness gauge (229 895)