Hypertherm Powermax 30 XP Plasma Cutter 088079 with Consumable Kit & Filter

SKU:
088079PACKA
|
$1,799.00
$2,000.00
(You save $201.00 )
Current Stock:
Adding to cart… The item has been added

COMES WITH 851479 CONSUMABLE KIT AND 128647 FILTER

Hypertherm Powermax 30 XP 088079 Overview

The Hypertherm Powermax 30 XP Plasma Cutter is a highly portable, 30 Amp, handheld plasma cutting system appropriate for a wide range of applications. It uses air or nitrogen to cut electrically conductive metals, such as mild steel, stainless steel, or aluminum.

Hypertherm Powermax 30 XP 088079 Plasma Cutter System includes

  • Hypertherm Powermax 30 XP Power supply, 15 ft. (4.5 m) Duramax LT hand torch with standard consumables, 15 ft. (4.5 m) work clamp
  • 240 V/20 A plug with adapters for 120 V/15 A and 240 V/20 A circuits
  • Operator and safety manuals
  • Consumable kit with 1 standard nozzle, 1 electrode, 1 Fine Cut nozzle and 1 Fine Cut deflector
  • Plastic carry case
  • Carrying strap
  • Leather gloves
  • Shade 5 glasses

Hypertherm Powermax 30 XP 088079 Benefits

Easy to use

  • System includes everything you need to get you cutting quickly and easily
  • Small size and light weight let you take the Hypertherm Powermax 30 XP just about anywhere
  • Plug into any 120 or 240 V power (convenient Auto-Voltage technology and plug adapters included)

Superior performance in a compact package

  • Fast cutting speeds and excellent cut quality let you finish jobs quicker, with fewer secondary operations
  • Built to withstand heavy-duty use in the most demanding environments

Two-in-one design for maximum versatility

  • High-power cutting on thick metal
  • Fine Cut consumables enable high quality cuts on thin metal, leaving a clean edge and a narrow kerf

Cutting with 120 V input power

Use Fine Cut nozzle and deflector for cutting at 120 V input power. When operating at the maximum recommended output of 25 A, the cut capacities are:

  • 6 mm (1/4") at 482 mm/min (19 ipm)
  • 10 mm (3/8") at 203 mm/min (8 ipm)
  • 12 mm (1/2") at 76 mm/min (3 ipm)

Hypertherm Powermax 30 XP 088079 Duramax LT torch

  • Designed to withstand impact and heat.
  • Twice the consumable life* and 70% more efficient on average for lower cost of cutting.

Hypertherm Powermax 30 XP 088079 Cutting with 120 V input power

Use Fine Cut nozzle and deflector for cutting at 120 V input power.  When operating at the maximum recommended output of 25 A, the cut capacities are:

  • 1/4" at 19 ipm
  • 3/8" at 8 ipm
  • 1/2" at 3 ipm

Hypertherm Powermax 30 XP 088079 Plasma Cutter Operating data

 CapacityThicknessCut speed
   
Recommended 3/8" 20 ipm
  1/2" 10 ipm
Severance 5/8" 5 ipm

Hypertherm Powermax 30 XP 088079 Relative cut performance on mild steel

Powermax30 XP relative cut performance on mild steel chart

*compared to Powermax30

Hypertherm Powermax 30 XP 088079 Downloads

Product documents

Input voltages 120-240 V, 1-PH, 50/60 Hz
Input current @ 3.8 kW 120-240 V, 1-PH, 25-18.8 A
Output current 15-30 A
Rated output voltage 125 VDC
Duty cycle @ 40C (104F) 35%, 240 V
20%, 120 V
Open circuit voltage (OCV) 256 VDC
Dimensions with handles 14.0" D; 6.6" W; 12.0" H
Weight w/ 15 ft. torch CSA: 21.4 lbs
Gas Supply Clean, dry, oil-free air or nitrogen
Recommended gas inlet
flow rate / pressure
113.3 l/min (4 scfm) at 5.5 bar (80 psi)
Input power cable length 10 ft.
Power supply type Inverter - IGBT
Engine drive requirement 5.5 kW for full 30 A output
Warranty Power supplies have a 3-year warranty and torches a 1-year warranty.

Custom Field

Product Reviews